HHome Appliance Help
Home › Appliance Help › Dishwasher: No water – “IE” error code

Dishwasher: No water – “IE” error code: Causes, Checks & Fixes

Does your dishwasher display an [IE] (Water Inlet Error) while running? Do you hear an alarm sounding as no water appears to be filling the the tub?

Dishwasher: No water – “IE” error code LG USA help image
Dishwasher: No water – “IE” error code LG USA help image 2
1 / 2
TroubleshootingWashers

What to Check First

  1. The water is cut off or the water supply hose is kinked, pinched, or bent.
  2. The water valve is closed.
  3. Inlet valve filter Clogged .
  4. Inlet hose is kinked.
  5. Water pressure is too low.
  6. Open the door of the cabinet underneath the kitchen sink and water faucet.
  7. Turn the water supply valve counterclockwise to open it.
  8. If the water still does not flow into the tub, check if the water pipe valve located above the water supply valve is turned off. Turn the water pipe valve counterclockwise to open it.
  9. Does your dishwasher display an [IE] (Water Inlet Error) while running? Do you hear an alarm sounding as no water appears to be filling the the tub?
  10. Your dishwasher will repeatedly and strongly spray water inside its tub cavity whilst washing your dishes then empty itself repeating the operation all over until the full cycle is completed. If a specified amount of water is not supplied to the dishwasher, an [IE] error will appear in the control panel display window.

Why This Can Happen

Symptoms can have more than one cause, and the correct steps depend on the exact model, installation and operating conditions. Use the checks above to narrow the issue before service.

Safety and Model-Specific Guidance

Stop troubleshooting if you notice burning, electrical damage, unsafe heat, gas odor, refrigerant concerns, or water near electrical components. Follow the official LG USA instructions for your exact model.

Frequently Asked Questions

What should I check first for Dishwasher: No water – “IE” error code?

The water is cut off or the water supply hose is kinked, pinched, or bent.

When should I stop troubleshooting and contact LG?

Stop if the product shows signs of electrical damage, burning, leaking near electrical components, or if the recommended checks do not resolve the issue. Use LG USA support for model-specific service guidance.

Does this guidance apply to every LG model?

Not always. Controls, error codes and service steps can differ by model. Confirm the exact model number and follow the linked LG USA article for model-specific instructions.

Related LG Products

These model pages are linked because the stored category or exact model matches this Help Library topic.

LG SIGNATURE-WM9901HBA Washers product image
Washers

LG SIGNATURE-WM9901HBA — Washers Model

Discover the LG SIGNATURE Front Load Washer that features 5.8 cu. ft. Mega Capacity and Built-In Intelligence. Shop WM9901HBA from LG USA.

SIGNATURE-WM9901HBA1 images

Buying Guides for This Product Type

Efficiency & running costWasher Efficiency, Energy & Running-Cost GuideHousehold use caseWasher Family & High-Use Household GuideFeatures & valueWasher Features Worth Paying For — Value GuideFit & installationWasher Fit, Installation & Delivery Planning

Related Help Articles

Installation[Water supply to LG top load washing machine] The boiler operates during washing in cold water.TroubleshootingE4 error code [styler]TroubleshootingDispenser is Stuck

Read the Official LG Guide