How to adjust uneven doors on your LG refrigerator — LG Help Guide

If the doors on your LG refrigerator are uneven, you can level it by turning the leveling legs or height adjustment screws at the bottom with a wrench. However, if the doors are misaligned front-to-back, we recommend contacting LG Customer Support for assistance, as adjusting them yourself could damage the floor.

TroubleshootingRefrigerators

What to Check First

  1. 1. Prepare the tool: Use the wrench included with your refrigerator.
  2. 2. Loosen the locking nut: Open the door that needs to be adjusted. Turn the locking nut at the bottom clockwise to loosen it.
  3. 3. Adjust the door height: Turn the height adjustment screw to align the doors. - Turn it clockwise to lower the door. - Turn it counterclockwise to raise the door.
  4. 4. Tighten the locking nut: Once the doors are aligned, turn the lock nut counterclockwise until it is securely tightened.
  5. If the refrigerator doors are misaligned from the front to back and they need to be aligned, moving the unit may damage the floor. In this case, we recommend contacting LG Customer Support for assistance, not to do it yourself.
  6. If the doors on your LG refrigerator are uneven, you can level it by turning the leveling legs or height adjustment screws at the bottom with a wrench. However, if the doors are misaligned front-to-back, we recommend contacting LG Customer Support for assistance, as adjusting them yourself could damage the floor.
  7. If the floor under the refrigerator is uneven or not solid, the refrigerator may not sit level. This can cause the doors to become uneven.
  8. You can adjust the door height using the height adjustment screw at the bottom hinge. Follow these steps:.
  9. Some models do not have height adjustment screws. In this case, turn the leveling legs at the bottom to level the refrigerator.
  10. Open the door, then turn the leveling hinge clockwise or counterclockwise with the wrench to adjust the height. The left door can be adjusted up to 2 mm.

Why This Can Happen

Symptoms can have more than one cause, and the correct steps depend on the exact model, installation and operating conditions. Use the checks above to narrow the issue before service.

Safety and Model-Specific Guidance

Stop troubleshooting if you notice burning, electrical damage, unsafe heat, gas odor, refrigerant concerns, or water near electrical components. Follow the official LG USA instructions for your exact model.

Frequently Asked Questions

What should I check first for How to adjust uneven doors on your LG refrigerator?

1. Prepare the tool: Use the wrench included with your refrigerator.

When should I stop troubleshooting and contact LG?

Stop if the product shows signs of electrical damage, burning, leaking near electrical components, or if the recommended checks do not resolve the issue. Use LG USA support for model-specific service guidance.

Does this guidance apply to every LG model?

Not always. Controls, error codes and service steps can differ by model. Confirm the exact model number and follow the linked LG USA article for model-specific instructions.

Related LG Products

These model pages are linked because the stored category or exact model matches this Help Library topic.

Read the Official LG Guide