What to Check First
- [Projectors with webOS]: The projector automatically detects and sets up the connected device without any additional settings.
- [webOS 5.0 projectors]: Press the Settings button on the remote, then select: All Settings, Connection, Device Connection Settings, Auto Device Detection.
- [webOS 4.5 projectors]: Press the Settings button on the remote, then select: All Settings, Connection, HDMI Device Settings, Auto Device Detection.
- If Universal Control is not set up automatically, you can set it up manually.
- [webOS 23 or later]: Press the Settings button on the remote, then select: All Settings, General, External Devices, Universal Control Settings.
- [webOS 6.0 to webOS 22]: Press the Settings button on the remote, then select: All Settings, General, Devices, External Devices, Universal Control Settings.
- [webOS 5.0]: Press the Settings button on the remote, then select: All Settings, Connection, Device Connection Settings, Universal Control Settings.
- [webOS 4.5]: Press the Settings button on the remote, then select: All Settings, Connection, Device Connector.
- The webOS version may vary by model and might not match the year you purchased the product. For details, please check the user manual or product specifications on the LG website.
- After connecting a set-top box to your LG projector, you can set up the Magic Remote as a universal remote. This allows you to control both the projector and the connected device with a single remote. Most devices are detected and set up automatically when connected to an HDMI port. If your device is not detected automatically, you can set it up manually from the Settings menu.
Why This Can Happen
Symptoms can have more than one cause, and the correct steps depend on the exact model, installation and operating conditions. Use the checks above to narrow the issue before service.
Safety and Model-Specific Guidance
Stop troubleshooting if you notice burning, electrical damage, unsafe heat, gas odor, refrigerant concerns, or water near electrical components. Follow the official LG USA instructions for your exact model.
Frequently Asked Questions
What should I check first for How to Set Up Universal Control for Connected Devices on Your LG Projector?
[Projectors with webOS]: The projector automatically detects and sets up the connected device without any additional settings.
When should I stop troubleshooting and contact LG?
Stop if the product shows signs of electrical damage, burning, leaking near electrical components, or if the recommended checks do not resolve the issue. Use LG USA support for model-specific service guidance.
Does this guidance apply to every LG model?
Not always. Controls, error codes and service steps can differ by model. Confirm the exact model number and follow the linked LG USA article for model-specific instructions.