[LG Air Conditioner] How to read error codes: Causes, Checks & Fixes

LG air conditioner error codes differ depending on the model. For wall-mounted units, check the LED on the remote, while stand-type models display them on the panel or LED. See the examples and instructions for reading the codes.

TroubleshootingAir Conditioners

What to Check First

LED indicator The indicator color is either green or red, depending on the model. The number of blinks indicates the number (1, 2, 3, etc.), and the interval between blinks indicates the digit: Long interval : Hundreds digit.
Medium interval : Tens digit.
Short interval : Ones digit.
Display Panel "CH" and the error code alternate on the display every 0.5 seconds.
1. On the Home screen, tap the [Menu] tab at the bottom, then select [Smart Diagnosis].
2. Select your product and follow the on-screen instructions to run [Smart Diagnosis].
3. Review the diagnostic results to check your product's detailed status and get troubleshooting guidance.
4. If the issue persists, contact LG Customer Support for further assistance.
LG air conditioner error codes differ depending on the model. For wall-mounted units, check the LED on the remote, while stand-type models display them on the panel or LED. See the examples and instructions for reading the codes.
The first LED indicates the ones digit of the error code. The second LED indicates the tens digit. (Example: If the first LED blinks 5 times steadily, it means error code CH05.).

Why This Can Happen

Symptoms can have more than one cause, and the correct steps depend on the exact model, installation and operating conditions. Use the checks above to narrow the issue before service.

Safety and Model-Specific Guidance

Stop troubleshooting if you notice burning, electrical damage, unsafe heat, gas odor, refrigerant concerns, or water near electrical components. Follow the official LG USA instructions for your exact model.

Frequently Asked Questions

What should I check first for [LG Air Conditioner] How to read error codes?

LED indicator The indicator color is either green or red, depending on the model. The number of blinks indicates the number (1, 2, 3, etc.), and the interval between blinks indicates the digit: Long interval : Hundreds digit.

When should I stop troubleshooting and contact LG?

Stop if the product shows signs of electrical damage, burning, leaking near electrical components, or if the recommended checks do not resolve the issue. Use LG USA support for model-specific service guidance.

Does this guidance apply to every LG model?

Not always. Controls, error codes and service steps can differ by model. Confirm the exact model number and follow the linked LG USA article for model-specific instructions.

Related LG Products

These model pages are linked because the stored category or exact model matches this Help Library topic.

Buying Guides for This Product Type

Features & valueAir Conditioner Features Worth Paying For — Value Guide Efficiency & running costAir Conditioner Efficiency, Energy & Running-Cost Guide Household use caseAir Conditioner Family & High-Use Household Guide Fit & installationAir Conditioner Fit, Installation & Delivery Planning

[LG Air Conditioner] How to read error codes: Causes, Checks & Fixes

What to Check First

Why This Can Happen

Safety and Model-Specific Guidance

Frequently Asked Questions

Related LG Products

LG AXRGALA01 — Thru-the-Wall Air Conditioner Architectural Grille

LG AXSVA4 — Thru-the-Wall Air Conditioner Wall Sleeve with Stamped Aluminum Grille

LG LP0525WFR — 5,100 BTU (SACC) / 9,000 BTU (ASHRAE) Portable Air Conditioner | Cools Up To 150 sq. ft.

LG LP0623WSR — 6,000 BTU (SACC) / 9,700 (ASHRAE) Portable Air Conditioner | Up To 250 sq. ft.

LG LP0723WSR — 7,000 BTU (SACC) / 10,500 BTU (ASHRAE) Portable Air Conditioner | Cools Up To 300 sq. ft.

Buying Guides for This Product Type

Related Help Articles