[LG Dehumidifier] Why Does the Bucket Full Light Stay On After

If your LG dehumidifier's "Bucket Full" light does not turn off even after you have emptied the water bucket, the float inside the bucket is likely stuck. Gently shaking the water tank to free the sensor usually resolves this issue.

TroubleshootingAir Care

What to Check First

  1. 1. Turn off the dehumidifier and carefully remove the water bucket.
  2. 2. Locate the float inside the water bucket.
  3. 3. Gently shake the water bucket up and down to check if the float moves freely.
  4. 4. Once the float is unstuck, reinstall the water bucket into the dehumidifier.
  5. 5. Turn the power back on and check if the " Bucket Full " light has turned off.
  6. Normal Position: The float should rest at the bottom when the bucket is empty.
  7. Stuck Position: The float is stuck at the top, causing the [Bucket Full] light to stay on.
  8. If your LG dehumidifier's "Bucket Full" light does not turn off even after you have emptied the water bucket, the float inside the bucket is likely stuck. Gently shaking the water tank to free the sensor usually resolves this issue.
  9. The location and appearance of the float may vary depending on your specific LG dehumidifier model.
  10. Do not open the float cover. Doing so may interfere with the float that detects when the bucket is full.

Why This Can Happen

Symptoms can have more than one cause, and the correct steps depend on the exact model, installation and operating conditions. Use the checks above to narrow the issue before service.

Safety and Model-Specific Guidance

Stop troubleshooting if you notice burning, electrical damage, unsafe heat, gas odor, refrigerant concerns, or water near electrical components. Follow the official LG USA instructions for your exact model.

Frequently Asked Questions

What should I check first for [LG Dehumidifier] Why Does the Bucket Full Light Stay On After Emptying the Bucket??

1. Turn off the dehumidifier and carefully remove the water bucket.

When should I stop troubleshooting and contact LG?

Stop if the product shows signs of electrical damage, burning, leaking near electrical components, or if the recommended checks do not resolve the issue. Use LG USA support for model-specific service guidance.

Does this guidance apply to every LG model?

Not always. Controls, error codes and service steps can differ by model. Confirm the exact model number and follow the linked LG USA article for model-specific instructions.

Read the Official LG Guide