[LG Dryer drying time] The drying time has finished, but the dryer

If the gas dryer determines that the laundry is not sufficiently dry when 6 minutes remain, it will add 10 minutes to continue the process. For electric dryers, it will make a determination at the 11 minute mark. This is a natural process for a thorough dry. Also, when drying is complete and [Anti Crease] is in progress, it may appear as if the dryer is….

TroubleshootingWashers

What to Check First

  1. Does the remaining time increase during drying?
  2. If the gas dryer determines that the laundry is not sufficiently dry when 6 minutes remain, it will add 10 minutes to continue the process. For electric dryers, it will make a determination at the 11 minute mark. This is a natural process for a thorough dry. Also, when drying is complete and [Anti Crease] is in progress, it may appear as if the dryer is running even after the timer has stopped.
  3. ➔ When a dotted border appears on the dryer's display, press the [Power] button to end the operation.
  4. If the [End] indicator and dotted border appear alternately on the dryer’s display as shown below, it means that [Anti Crease] is in progress. As the drying cycle has already been completed, press the [Power] button to end the operation, and wait for the [Door Locked] indicator to disappear before opening the dryer door to remove the laundry.
  5. ➔ This may be due to failure to select the appropriate drying cycle for the laundry or there may be foreign substances on the humidity sensor or filter.
  6. Reasons for extended drying time may vary. The filter may be clogged, which can block proper air circulation, or the thickness of the laundry may vary, making it harder for the humidity sensor to determine the level of dryness. A drying cycle that is not suitable for the laundry may have been selected. Low temperatures surrounding the dryer may mean longer times for preheating and increase drying times.
  7. This guide was created for all models, so the images or content may be different from your product.

Why This Can Happen

Symptoms can have more than one cause, and the correct steps depend on the exact model, installation and operating conditions. Use the checks above to narrow the issue before service.

Safety and Model-Specific Guidance

Stop troubleshooting if you notice burning, electrical damage, unsafe heat, gas odor, refrigerant concerns, or water near electrical components. Follow the official LG USA instructions for your exact model.

Frequently Asked Questions

What should I check first for [LG Dryer drying time] The drying time has finished, but the dryer continues to operate?

Does the remaining time increase during drying?

When should I stop troubleshooting and contact LG?

Stop if the product shows signs of electrical damage, burning, leaking near electrical components, or if the recommended checks do not resolve the issue. Use LG USA support for model-specific service guidance.

Does this guidance apply to every LG model?

Not always. Controls, error codes and service steps can differ by model. Confirm the exact model number and follow the linked LG USA article for model-specific instructions.

Related LG Products

These model pages are linked because the stored category or exact model matches this Help Library topic.

Read the Official LG Guide