[LG dryer installation] [Steam TROMM] I would like to connect the

A water supply hose is a hose used to connect a dryer with a faucet. You can connect the hose easily just using a Phillips driver. The connection method may differ depending on the type of water supply hose and the shape of the faucet. Please check them first.

TroubleshootingDryers

What to Check First

  1. I would like to connect the dryer’s water supply hose.
  2. Turn off the dryer and the faucet before connecting or extending the water supply hose.
  3. Dryers only use cold water.
  4. A water supply hose is a hose used to connect a dryer with a faucet. You can connect the hose easily just using a Phillips driver. The connection method may differ depending on the type of water supply hose and the shape of the faucet. Please check them first.
  5. 1. Press the push-switch of the water supply hose to separate the coupling device and the hose. 2. Without using the coupling device, connect the water supply hose to the faucet whilst pressing the push-switch.
  6. 1. First, separate the coupling device of the water supply hose from the hose. If they are not separated, they may not be tightened completely and water may leak after assembly.
  7. 2. Turn the 4 screws on the coupling device anti-clockwise to loosen them adequately so that they fit the circumference of the faucet. If the faucet is too big, pull out the guide plate (round white plastic) before loosening the screws.
  8. 3. Fit the coupling device to the faucet. At this time, insert it until the door gasket inside the coupling device is in contact with the faucet.
  9. 4. Turn the 4 screws on the coupling device clockwise and tighten them fully.
  10. 5. Check the threads on the end of the water supply hose and the coupling device and turn the fitting clockwise to tighten the joint. When the door gasket is reached, turn 1 or 2 rounds more to tighten firmly against the seal.

Why This Can Happen

Symptoms can have more than one cause, and the correct steps depend on the exact model, installation and operating conditions. Use the checks above to narrow the issue before service.

Safety and Model-Specific Guidance

Stop troubleshooting if you notice burning, electrical damage, unsafe heat, gas odor, refrigerant concerns, or water near electrical components. Follow the official LG USA instructions for your exact model.

Frequently Asked Questions

What should I check first for [LG dryer installation] [Steam TROMM] I would like to connect the water supply hose?

I would like to connect the dryer’s water supply hose.

When should I stop troubleshooting and contact LG?

Stop if the product shows signs of electrical damage, burning, leaking near electrical components, or if the recommended checks do not resolve the issue. Use LG USA support for model-specific service guidance.

Does this guidance apply to every LG model?

Not always. Controls, error codes and service steps can differ by model. Confirm the exact model number and follow the linked LG USA article for model-specific instructions.

Related LG Products

These model pages are linked because the stored category or exact model matches this Help Library topic.

Read the Official LG Guide