HHome Appliance Help
Home › Appliance Help › [LG dryer - Residual water] I want to know how to remove residual water

[LG dryer - Residual water] I want to know how to remove residual

If you don’t use the dryer for a long time, an odor may come from inside the drum. Excessive use of detergents may cause an odor from inside the dryer.

[LG dryer - Residual water] I want to know how to remove residual water LG USA help image
TroubleshootingDryers

What to Check First

  1. An odor comes from inside the machine.
  2. I want to know how to remove residual water.
  3. If you don’t use the dryer for a long time, an odor may come from inside the drum. Excessive use of detergents may cause an odor from inside the dryer.
  4. It is better to remove residual water if you will not use the dryer for a long time or before you run Tub Clean.
  5. There may be lots of water left in the product; drain it by running the ventilation cycle. Press the Power button, select Ventilation, and then press Start/Pause. Run Ventilation for 2 to 3 minutes, then press the Power button to stop the machine.
  6. Prepare a drain tray and place it under the product.
  7. 1. Pull out the safety drain hose from the holder and place it over the drain tray.
  8. 2. Pull out the stopper by turning it counterclockwise and remove all water left inside the product.
  9. 3. Ensure that you reinstall the stopper after removing residual water.
  10. A loose stopper may cause leaking.

Why This Can Happen

Symptoms can have more than one cause, and the correct steps depend on the exact model, installation and operating conditions. Use the checks above to narrow the issue before service.

Safety and Model-Specific Guidance

Stop troubleshooting if you notice burning, electrical damage, unsafe heat, gas odor, refrigerant concerns, or water near electrical components. Follow the official LG USA instructions for your exact model.

Frequently Asked Questions

What should I check first for [LG dryer - Residual water] I want to know how to remove residual water?

An odor comes from inside the machine.

When should I stop troubleshooting and contact LG?

Stop if the product shows signs of electrical damage, burning, leaking near electrical components, or if the recommended checks do not resolve the issue. Use LG USA support for model-specific service guidance.

Does this guidance apply to every LG model?

Not always. Controls, error codes and service steps can differ by model. Confirm the exact model number and follow the linked LG USA article for model-specific instructions.

Related LG Products

These model pages are linked because the stored category or exact model matches this Help Library topic.

Buying Guides for This Product Type

Household use caseDryer Family & High-Use Household GuideFeatures & valueDryer Features Worth Paying For — Value GuidePerformance & capacityDryer Performance, Capacity & Everyday-Use GuideEfficiency & running costDryer Efficiency, Energy & Running-Cost Guide

Related Help Articles

Repair[LG Dryer Condenser Care] How to use the condenser care functionTroubleshooting[LG Clothes Dryer] How to assemble the rubber cap of the water drain trayRepair[LG dryer - Remote start] [Electric heat pump Wi-Fi] How to operate the dryer in the remote start mode

Read the Official LG Guide