HHome Appliance Help
Home › Appliance Help › [LG Front Load Washer] How Does the Steam Feature Work?

[LG Front Load Washer] How Does the Steam Feature Work? — LG Help

Once the water fill is complete, the steam generator heats for approximately 20 minutes. Then, steam is released based on the water temperature inside the drum. Steam is produced by heating water to approximately 100°C (212°F), and sprayed at approximately 80°C (176°F).

[LG Front Load Washer] How Does the Steam Feature Work? LG USA help image
TroubleshootingWashers

What to Check First

  1. Steam sprays from the top-center (12 o’clock) position of the door gasket. It may not be visible due to the temperature inside the drum.
  2. Steam sprays only during the wash phase. During the rinse phase, cold water circulates through the drum.
  3. (Features may vary by model.).
  4. Once the water fill is complete, the steam generator heats for approximately 20 minutes. Then, steam is released based on the water temperature inside the drum. Steam is produced by heating water to approximately 100°C (212°F), and sprayed at approximately 80°C (176°F).
  5. This guide applies to multiple models, so images or content may differ from your actual product.

Why This Can Happen

Symptoms can have more than one cause, and the correct steps depend on the exact model, installation and operating conditions. Use the checks above to narrow the issue before service.

Safety and Model-Specific Guidance

Stop troubleshooting if you notice burning, electrical damage, unsafe heat, gas odor, refrigerant concerns, or water near electrical components. Follow the official LG USA instructions for your exact model.

Frequently Asked Questions

What should I check first for [LG Front Load Washer] How Does the Steam Feature Work??

Steam sprays from the top-center (12 o’clock) position of the door gasket. It may not be visible due to the temperature inside the drum.

When should I stop troubleshooting and contact LG?

Stop if the product shows signs of electrical damage, burning, leaking near electrical components, or if the recommended checks do not resolve the issue. Use LG USA support for model-specific service guidance.

Does this guidance apply to every LG model?

Not always. Controls, error codes and service steps can differ by model. Confirm the exact model number and follow the linked LG USA article for model-specific instructions.

Related LG Products

These model pages are linked because the stored category or exact model matches this Help Library topic.

LG SIGNATURE-WM9901HBA Washers product image
Washers

LG SIGNATURE-WM9901HBA — Washers Model

Discover the LG SIGNATURE Front Load Washer that features 5.8 cu. ft. Mega Capacity and Built-In Intelligence. Shop WM9901HBA from LG USA.

SIGNATURE-WM9901HBA1 images

Buying Guides for This Product Type

Features & valueWasher Features Worth Paying For — Value GuideEfficiency & running costWasher Efficiency, Energy & Running-Cost GuideHousehold use caseWasher Family & High-Use Household GuideFit & installationWasher Fit, Installation & Delivery Planning

Related Help Articles

Troubleshooting[LG Front Load Washer] Exterior becomes hot during washingTroubleshooting[LG Front Load Washer] How to resolve a UE (unbalanced) errorTroubleshooting[LG Front Load Washer] Fabric softener dispensed too early

Read the Official LG Guide