[LG Front Load Washer] I'd like to know how to set the button

When you press the cycle selection button or turn the dial on the front display, you will hear a "ding-ding" button sound. You can turn the sound heard when pressing buttons on or off. (Not applicable to some models).

TroubleshootingWashers

What to Check First

  1. When you press the cycle selection button or turn the dial on the front display, you will hear a "ding-ding" button sound. You can turn the sound heard when pressing buttons on or off. (Not applicable to some models).
  2. - The notification sound cannot be set if you select the notification sound button immediately after turning on the product. You can set the notification sound after turning on the product and selecting a cycle or operating the product.
  3. ➔ Press and hold the Button Sound or Notification Sound button for 3 seconds.
  4. You can enable or disable the function.
  5. ➔ Press and hold the *Notification Sound button under the Rinse button for more than 3 seconds, and it will be set with a "ding" sound.
  6. After turning on the power and operating, press and hold the Delay End button for 3 seconds to enable or disable the function.
  7. After turning on the power and operating, press and hold the Rinse+Spin button for 3 seconds to enable or disable the function.
  8. WashTower LED models cannot set the notification sound on the control panel. Please turn the product notification sound ON/OFF through the LG ThinQ app.
  9. 1. Press Settings on the touch control panel to enter the Washer Other Settings menu.
  10. 2. Select Notification Sound in the Washer Other Settings menu to set the volume (Off / Low / Medium / High / Very High) .

Why This Can Happen

Symptoms can have more than one cause, and the correct steps depend on the exact model, installation and operating conditions. Use the checks above to narrow the issue before service.

Safety and Model-Specific Guidance

Stop troubleshooting if you notice burning, electrical damage, unsafe heat, gas odor, refrigerant concerns, or water near electrical components. Follow the official LG USA instructions for your exact model.

Frequently Asked Questions

What should I check first for [LG Front Load Washer] I'd like to know how to set the button sounds.?

When you press the cycle selection button or turn the dial on the front display, you will hear a "ding-ding" button sound. You can turn the sound heard when pressing buttons on or off. (Not applicable to some models).

When should I stop troubleshooting and contact LG?

Stop if the product shows signs of electrical damage, burning, leaking near electrical components, or if the recommended checks do not resolve the issue. Use LG USA support for model-specific service guidance.

Does this guidance apply to every LG model?

Not always. Controls, error codes and service steps can differ by model. Confirm the exact model number and follow the linked LG USA article for model-specific instructions.

Related LG Products

These model pages are linked because the stored category or exact model matches this Help Library topic.

Read the Official LG Guide