LG Washer – How to Stack An LG Washer and Dryer — LG Help Guide

Some select LG washer and dryers sets are able to be stacked allowing you more space in your laundry area.

InstallationWashers

What to Check First

  1. Not all washers and dryer can be stacked. Please make sure your models are compatible and stackable before attempting to stack the set.
  2. DO NOT attempt the stacking procedure with only one person.
  3. When stacking the dryer on top of the washer, it is imperative and mandatory to purchase the optional Stacking Kit accessory and install it on the washer. Failure to do so risks causing noise and malfunction and may result in bodily harm and damage to product.
  4. Stacking is only possible when sizes of both dryer and washer are the same.
  5. Checking and Choosing the Proper Location 1 Clean the floor before installation. Make sure to select solid and smooth ground. 2 Two or more people are needed for moving and unpacking the washing machine. 3 Allow for sufficient space between the walls and the washing machine for installation.
  6. Washer is bound to vibrate slightly. If the washer side panels rub against a wall and vibrating while in spin cycle, both vibration and vibration noise will get amplified throughout the house. Best recommendation to avoid this scenario is to leave sufficient space between the sides of the washer and the walls and make sure flooring is extra rigid.
  7. LASTLY VERY! VERY IMPORTANT! make sure the floor underneath stacked units is INCREDIBLY RIGID! Any play or softness that could allow washer to wobble will have combined units vibrate exponentially and reverberate throughout the house. Nobody wants that!
  8. Some select LG washer and dryers sets are able to be stacked allowing you more space in your laundry area.
  9. 1 Clean the floor before installation. Make sure to select solid and smooth ground.
  10. 2 Two or more people are needed for moving and unpacking the washing machine.

Why This Can Happen

Symptoms can have more than one cause, and the correct steps depend on the exact model, installation and operating conditions. Use the checks above to narrow the issue before service.

Safety and Model-Specific Guidance

Stop troubleshooting if you notice burning, electrical damage, unsafe heat, gas odor, refrigerant concerns, or water near electrical components. Follow the official LG USA instructions for your exact model.

Frequently Asked Questions

What should I check first for LG Washer – How to Stack An LG Washer and Dryer?

Not all washers and dryer can be stacked. Please make sure your models are compatible and stackable before attempting to stack the set.

When should I stop troubleshooting and contact LG?

Stop if the product shows signs of electrical damage, burning, leaking near electrical components, or if the recommended checks do not resolve the issue. Use LG USA support for model-specific service guidance.

Does this guidance apply to every LG model?

Not always. Controls, error codes and service steps can differ by model. Confirm the exact model number and follow the linked LG USA article for model-specific instructions.

Related LG Products

These model pages are linked because the stored category or exact model matches this Help Library topic.

Read the Official LG Guide