How to Use Indoor Dehumidification on Your LG Styler — LG Help

The Indoor Dehumidification feature removes moisture from the room where your LG Styler is installed. To use this feature, turn on your Styler and select Indoor Dehumidification from the Custom Dry(Gentle Dry) menu, or use the left and right buttons to choose this option. Next, open the Styler door at least 45 degrees (some models operate with the door….

TroubleshootingWashers

What to Check First

  1. Dehumidification performance may vary depending on your room's temperature and humidity.
  2. If the drain tank becomes full, your Styler pauses, sounds an alert, and displays Empty Water. To continue, empty the drain tank and press Start/Pause.
  3. The Indoor Dehumidification feature removes moisture from the room where your LG Styler is installed. To use this feature, turn on your Styler and select Indoor Dehumidification from the Custom Dry(Gentle Dry) menu, or use the left and right buttons to choose this option. Next, open the Styler door at least 45 degrees (some models operate with the door closed) and press Start/Pause to begin dehumidifying.
  4. Use this feature when the room or closet where your Styler is installed feels damp, especially during rainy weather. Your Styler draws in humid air from the surrounding area to help reduce moisture and keep the room comfortable.
  5. Press Power on your Styler control panel.
  6. Press Custom Dry or Gentle Dry repeatedly to select Indoor Dehumidification. You can also use the left and right arrow buttons on the display to choose this option. On some models, this feature is available under Downloaded Cycle.
  7. The operating time is set to two hours when you first select Indoor Dehumidification. Press [Custom Dry] again or select the time setting at the bottom of the display to change the operating time to four hours. The default operating time is two hours. To change the time to four hours, press Custom Dry or Gentle Dry again, or select the time setting at the bottom of the display.
  8. Open the Styler door at least 45 degrees so your Styler can draw in air from the room. Note: Some newer models with an automatic ventilation system operate with the door closed.
  9. Press Start/Pause to begin dehumidifying.
  10. This guide is based on standard models. The settings menu may vary by model.

Why This Can Happen

Symptoms can have more than one cause, and the correct steps depend on the exact model, installation and operating conditions. Use the checks above to narrow the issue before service.

Safety and Model-Specific Guidance

Stop troubleshooting if you notice burning, electrical damage, unsafe heat, gas odor, refrigerant concerns, or water near electrical components. Follow the official LG USA instructions for your exact model.

Frequently Asked Questions

What should I check first for How to Use Indoor Dehumidification on Your LG Styler?

Dehumidification performance may vary depending on your room's temperature and humidity.

When should I stop troubleshooting and contact LG?

Stop if the product shows signs of electrical damage, burning, leaking near electrical components, or if the recommended checks do not resolve the issue. Use LG USA support for model-specific service guidance.

Does this guidance apply to every LG model?

Not always. Controls, error codes and service steps can differ by model. Confirm the exact model number and follow the linked LG USA article for model-specific instructions.

Related LG Products

These model pages are linked because the stored category or exact model matches this Help Library topic.

Read the Official LG Guide