HHome Appliance Help
Home › Appliance Help › How to Use the Spin Only Cycle on Your LG Washer

How to Use the Spin Only Cycle on Your LG Washer — LG Help Guide

If your laundry is still too wet after a wash, or you just want to spin excess water out of hand-washed items, you can run a Spin Only cycle. Here's how to set it up.

Product images are temporarily unavailable. Check LG USA for the latest official images.
TroubleshootingWashers

What to Check First

  1. If your laundry is still too wet after a wash, or you just want to spin excess water out of hand-washed items, you can run a Spin Only cycle. Here's how to set it up.
  2. 1.Press the Power button to turn on the washer.
  3. 2.Press the Spin button on the right side of the control panel once. Press it repeatedly to select your desired spin speed (High, Medium, or Low).
  4. 3.Press the Start/Pause button to start the Spin Only cycle.
  5. 2.Press and hold the button marked with an asterisk (*), such as Extra Rinse or Rinse+Spin, for at least 3 seconds.
  6. 3.Check that the wash and rinse times disappear from the display and only the spin time (e.g., 14 minutes) is shown.
  7. 4.Press the Start/Pause button to start the Spin Only cycle.
  8. 2.Turn the dial to Spin Only.
  9. If you've tried the steps above and the problem persists, you can get more support through AI Chat in the bottom right corner of the LG website, or by requesting a technician visit.
  10. ( ※ Note: A service fee may apply if your product is out of warranty.).

Why This Can Happen

Symptoms can have more than one cause, and the correct steps depend on the exact model, installation and operating conditions. Use the checks above to narrow the issue before service.

Safety and Model-Specific Guidance

Stop troubleshooting if you notice burning, electrical damage, unsafe heat, gas odor, refrigerant concerns, or water near electrical components. Follow the official LG USA instructions for your exact model.

Frequently Asked Questions

What should I check first for How to Use the Spin Only Cycle on Your LG Washer?

If your laundry is still too wet after a wash, or you just want to spin excess water out of hand-washed items, you can run a Spin Only cycle. Here's how to set it up.

When should I stop troubleshooting and contact LG?

Stop if the product shows signs of electrical damage, burning, leaking near electrical components, or if the recommended checks do not resolve the issue. Use LG USA support for model-specific service guidance.

Does this guidance apply to every LG model?

Not always. Controls, error codes and service steps can differ by model. Confirm the exact model number and follow the linked LG USA article for model-specific instructions.

Related LG Products

These model pages are linked because the stored category or exact model matches this Help Library topic.

LG SIGNATURE-WM9901HBA Washers product image
Washers

LG SIGNATURE-WM9901HBA — Washers Model

Discover the LG SIGNATURE Front Load Washer that features 5.8 cu. ft. Mega Capacity and Built-In Intelligence. Shop WM9901HBA from LG USA.

SIGNATURE-WM9901HBA1 images

Buying Guides for This Product Type

Household use caseWasher Family & High-Use Household GuidePerformance & capacityWasher Performance, Capacity & Everyday-Use GuideEfficiency & running costWasher Efficiency, Energy & Running-Cost GuideFeatures & valueWasher Features Worth Paying For — Value Guide

Related Help Articles

TroubleshootingHow to use the [Spin Only] cycle on your LG washerTroubleshootingHow to Use Indoor Dehumidification on Your LG StylerTroubleshootingIf Water Leaks from the Faucet or Water Supply Hose on Your LG Front Load Washer

Read the Official LG Guide