[LG Dryer power] The power turns off during use, or there is no

The cause could be due to outlet capacity, circuit breaker capacity, or the power cord not being securely plugged in. After plugging in the power cord, press the power switch on the front of the dryer to check if power is supplied.

TroubleshootingDryers

What to Check First

  1. The cause could be due to outlet capacity, circuit breaker capacity, or the power cord not being securely plugged in. After plugging in the power cord, press the power switch on the front of the dryer to check if power is supplied.
  2. 1. When using an extension cord, ensure that the outlet has a capacity of 16A. If the capacity is less than 16A, it may cause the dryer to turn off due to insufficient power supply. If the extension cord has appliances plugged in other than the dryer, unplug them and avoid using them and the dryer simultaneously. Using electric dryers and other appliances together on a single outlet can cause the power to turn off due to insufficient capacity. (This also applies to wall outlets.).
  3. 2. If you're not using an extension cord, ensure that the power cord is plugged in correctly.
  4. 1. Open the door and check if the lamp inside is lit. If the lamp is on, the power supply is working but there may be a problem with the machine. An inspection by an LG service technician is required.
  5. 2. If the lamp is not on, make sure that the power cord is plugged in correctly.
  6. 3. If the power cord is plugged in correctly, check the circuit breaker.
  7. 1. If there is no sign on the display when pressing the [Power] button while connected to the outlet, connect another electrical device to the power supply (outlet) to check if the outlet is working properly.
  8. 2. If the connected electrical device fails to work, there is a high possibility that there is a problem with the power source itself, so check the power supply. If the connected electrical device is working properly, the dryer needs to be inspected. In this case, contact an LG service technician for on-site service.
  9. 3. Check whether an extension cord is being used and connect to a single wall outlet if possible.
  10. ※ If the problem still persists, it is recommended that you ask for an inspection by an LG service technician through accurate diagnosis.

Why This Can Happen

Symptoms can have more than one cause, and the correct steps depend on the exact model, installation and operating conditions. Use the checks above to narrow the issue before service.

Safety and Model-Specific Guidance

Stop troubleshooting if you notice burning, electrical damage, unsafe heat, gas odor, refrigerant concerns, or water near electrical components. Follow the official LG USA instructions for your exact model.

Frequently Asked Questions

What should I check first for [LG Dryer power] The power turns off during use, or there is no power supply?

The cause could be due to outlet capacity, circuit breaker capacity, or the power cord not being securely plugged in. After plugging in the power cord, press the power switch on the front of the dryer to check if power is supplied.

When should I stop troubleshooting and contact LG?

Stop if the product shows signs of electrical damage, burning, leaking near electrical components, or if the recommended checks do not resolve the issue. Use LG USA support for model-specific service guidance.

Does this guidance apply to every LG model?

Not always. Controls, error codes and service steps can differ by model. Confirm the exact model number and follow the linked LG USA article for model-specific instructions.

Related LG Products

These model pages are linked because the stored category or exact model matches this Help Library topic.

Read the Official LG Guide