What to Check First
- Do not locate your range where it may be subject to strong drafts.
- Any openings in the floor or wall behind the range should be sealed.
- Make sure the openings around the base of the range that supply fresh air for combustion and ventilation are not blocked by carpeting or woodwork.
- NEVER reuse an old connector when installing a new range.
- To protect against gas leaks, use a qualified pipe joint sealant on all external threads.
- Yellow flames—Call for service.
- Yellow tips on outer cones— It is normal for LP gas.
- Soft blue flames— It is normal for natural gas.
- Congratulations on your new LG gas range. Installation and service must be performed by an authorized licensed installer, service agency, or gas supplier.
- Gas Range Installation - LG Range.
Why This Can Happen
Symptoms can have more than one cause, and the correct steps depend on the exact model, installation and operating conditions. Use the checks above to narrow the issue before service.
Safety and Model-Specific Guidance
Frequently Asked Questions
What should I check first for LG Range – How to Install a Gas Range?
Do not locate your range where it may be subject to strong drafts.
When should I stop troubleshooting and contact LG?
Stop if the product shows signs of electrical damage, burning, leaking near electrical components, or if the recommended checks do not resolve the issue. Use LG USA support for model-specific service guidance.
Does this guidance apply to every LG model?
Not always. Controls, error codes and service steps can differ by model. Confirm the exact model number and follow the linked LG USA article for model-specific instructions.
Related LG Products
These model pages are linked because the stored category or exact model matches this Help Library topic.