HHome Appliance Help
Home › Appliance Help › LG Smart Blu-ray - Connecting to TV

LG Smart Blu-ray - Connecting to TV — LG Help Guide: Causes, Checks

The first thing we would like to help you do is get your LG Smart Blu-ray Player hooked up to your television so you can start enjoying its many features. Even if you've already hooked it up to your television, you may want to double-check that you have everything set up correctly.

LG Smart Blu-ray - Connecting to TV LG USA help image
OperationTVs

What to Check First

  1. Try switching off the HDMI/DVI device and this player. Next, switch on the HDMI/DVI device and wait about 30 seconds, then switch on this player.
  2. The connected device's video input is set correctly for this unit.
  3. The connected device is compatible with 720x480p, 1280x720p, 1920x1080i or 1920x1080p video input.
  4. The picture will not be displayed properly with a non HDCP device.
  5. This player does not play back and TV screen is changed to black screen.
  6. The first thing we would like to help you do is get your LG Smart Blu-ray Player hooked up to your television so you can start enjoying its many features. Even if you've already hooked it up to your television, you may want to double-check that you have everything set up correctly.
  7. If you have an HDMI TV or monitor equipped with HDMI ports, you can connect it to this player using an HDMI cable ( Type A , High Speed HDMI™ Cable ). This is the simplest, and best, way to hook up your new LG Smart Blu-ray Player .
  8. Connect the HDMI jack on the player to the HDMI jack on an HDMI compatible TV or monitor.
  9. Set the TV's input source to HDMI. You should be all set!
  10. When you connect an HDMI or DVI compatible device, make sure of the following:.

Why This Can Happen

Symptoms can have more than one cause, and the correct steps depend on the exact model, installation and operating conditions. Use the checks above to narrow the issue before service.

Safety and Model-Specific Guidance

Stop troubleshooting if you notice burning, electrical damage, unsafe heat, gas odor, refrigerant concerns, or water near electrical components. Follow the official LG USA instructions for your exact model.

Frequently Asked Questions

What should I check first for LG Smart Blu-ray - Connecting to TV?

Try switching off the HDMI/DVI device and this player. Next, switch on the HDMI/DVI device and wait about 30 seconds, then switch on this player.

When should I stop troubleshooting and contact LG?

Stop if the product shows signs of electrical damage, burning, leaking near electrical components, or if the recommended checks do not resolve the issue. Use LG USA support for model-specific service guidance.

Does this guidance apply to every LG model?

Not always. Controls, error codes and service steps can differ by model. Confirm the exact model number and follow the linked LG USA article for model-specific instructions.

Related LG Products

These model pages are linked because the stored category or exact model matches this Help Library topic.

Buying Guides for This Product Type

Smart featuresTV Smart Features, Apps & Connectivity GuideFeatures & valueTV Features Worth Paying For — Value GuideDisplay technologyOLED vs QNED vs UHD TV GuideEfficiency & running costTV Efficiency, Energy & Running-Cost Guide

Related Help Articles

TroubleshootingLG Blu-Ray Player - Setting Up Your Wireless NetworkRepairLG Smart TV Remote Control - I cannot turn on my TV with voice commands.TroubleshootingLG StanbyME TV - I want to know about the battery usable time and charging time

Read the Official LG Guide