[LG smart TV monitor] Let’s see how to connect a Bluetooth device

Once a Bluetooth audio device has been connected, it will be saved in the Registered Device List automatically so that later you can simply choose it from the list without having to search for it.

TroubleshootingTVs

What to Check First

  1. Check if your Bluetooth speaker and headset are turned on.
  2. If connection fails though they are turned on, check if you have recently used them with devices other than the smart TV monitor (e.g., smart phone, beam project, etc.). If such is the case, disable the connection from that device.
  3. After deleting the device from the Registered Device List, select Search Device, and, when the Bluetooth speaker and headset appear on the list, register them again.
  4. Once a Bluetooth audio device has been connected, it will be saved in the Registered Device List automatically so that later you can simply choose it from the list without having to search for it.
  5. ➔ Bluetooth connection fails.
  6. 1. Turn your Bluetooth device that can be connected onto the pairing mode (pairing modes vary with devices).
  7. 2. Select Wired Internet Settings - [ Settings] button on the remote control → [ All Settings] → [ Sound] → [Sound Out] → [Use Wireless Speaker] → [ Bluetooth Device] and, in the [Connectable Devices], Please search and connect.
  8. 3. If the Bluetooth device model that you wish to connect is not listed, turn it off and on, and then press Search to retry searching.
  9. 2. Select Wired Internet Settings - [ Settings] button on the remote control → [ All Settings] → [ Sound] → [Select Output Speaker] → Device List ] under [Bluetooth], and, in the [Available Devices], select [Search] and connect it.
  10. This guide was created for all models, so the images or content may be different from your product.

Why This Can Happen

Symptoms can have more than one cause, and the correct steps depend on the exact model, installation and operating conditions. Use the checks above to narrow the issue before service.

Safety and Model-Specific Guidance

Stop troubleshooting if you notice burning, electrical damage, unsafe heat, gas odor, refrigerant concerns, or water near electrical components. Follow the official LG USA instructions for your exact model.

Frequently Asked Questions

What should I check first for [LG smart TV monitor] Let’s see how to connect a Bluetooth device?

Check if your Bluetooth speaker and headset are turned on.

When should I stop troubleshooting and contact LG?

Stop if the product shows signs of electrical damage, burning, leaking near electrical components, or if the recommended checks do not resolve the issue. Use LG USA support for model-specific service guidance.

Does this guidance apply to every LG model?

Not always. Controls, error codes and service steps can differ by model. Confirm the exact model number and follow the linked LG USA article for model-specific instructions.

Related LG Products

These model pages are linked because the stored category or exact model matches this Help Library topic.

Read the Official LG Guide