What to Check First
- The All-in-One Tower has a separate charger at the top, allowing you to charge the vacuum and an extra battery at the same time.
- → Insert the vacuum cleaner with the battery installed into the charging station.
- Make sure the locking tab is fully seated in the locking slot on the charging station. Once the vacuum is securely in place, you will hear a beep and the battery level indicator will begin blinking as charging starts.
- Charging progresses in 3 stages based on the remaining charge. Once fully charged, the battery level indicator stays on.
- → Open the control panel on the All-in-One Tower, insert the spare battery, and then close the panel. The spare charging indicator will blink as charging begins.
- When fully charged, the indicator will stay on.
- This guide was created for all models, so the images or content may be different from your product.
Why This Can Happen
Symptoms can have more than one cause, and the correct steps depend on the exact model, installation and operating conditions. Use the checks above to narrow the issue before service.
Safety and Model-Specific Guidance
Frequently Asked Questions
What should I check first for [LG All-in-One Tower] How to charge the vacuum and spare battery?
The All-in-One Tower has a separate charger at the top, allowing you to charge the vacuum and an extra battery at the same time.
When should I stop troubleshooting and contact LG?
Stop if the product shows signs of electrical damage, burning, leaking near electrical components, or if the recommended checks do not resolve the issue. Use LG USA support for model-specific service guidance.
Does this guidance apply to every LG model?
Not always. Controls, error codes and service steps can differ by model. Confirm the exact model number and follow the linked LG USA article for model-specific instructions.