What to Check First
- The washer automatically determines the wash time by measuring the weight of what is assumed to be dry laundry. If the laundry is bunched up on one side or if too much detergent was added, the wash time may increase.
- ➔ Wash the right amount of laundry at a time.
- Adjust the amount of the load, keeping in mind that the washer performs best when you load the tub to about 2/3 of its capacity. If there is too much laundry, divide the load. If too little, add more laundry.
- ➔ Put in dry clothes for washing.
- If your laundry is quite wet, remove excess water or spin dry wet laundry before washing. It is advised to use high efficiency detergent for front load washer. It is also important to use an appropriate amount of detergent according to load. Washing wet laundry may cause the wash time to increase. Washer operation time is calculated on the assumption that dry laundry was loaded. If wet laundry is loaded, the washer mistakenly concludes that there is more laundry than there is actually.
- Changes in the wash time depending on whether the laundry is wet.
- Standard cycle default settings: Rinse twice, high spin drying, water temperature of 40°C/104°F.
- ➔ Stick to the recommended amount specified on the detergent label.
- Using too much detergent can lead to excessive sudsing, increasing the wash time. It is advised to use high efficiency detergent for the front load washer. It is also important to use an appropriate amount based on the load size as indicated on the detergent label.
- 1. Hold the diagonal edges of the washer's top plate, pressing down to detect shaking.
Why This Can Happen
Symptoms can have more than one cause, and the correct steps depend on the exact model, installation and operating conditions. Use the checks above to narrow the issue before service.
Safety and Model-Specific Guidance
Frequently Asked Questions
What should I check first for LG Frontload Washer - Wash Time Keeps Extending?
The washer automatically determines the wash time by measuring the weight of what is assumed to be dry laundry. If the laundry is bunched up on one side or if too much detergent was added, the wash time may increase.
When should I stop troubleshooting and contact LG?
Stop if the product shows signs of electrical damage, burning, leaking near electrical components, or if the recommended checks do not resolve the issue. Use LG USA support for model-specific service guidance.
Does this guidance apply to every LG model?
Not always. Controls, error codes and service steps can differ by model. Confirm the exact model number and follow the linked LG USA article for model-specific instructions.
Related LG Products
These model pages are linked because the stored category or exact model matches this Help Library topic.